Art. Nr.: 11245 Angular
Page 4 of 17
EN
5. Assembly Preparation
•
Read the assembly instructions carefully and follow the assembly steps.
•
Allow sufficient time for the assembly.
•
Create a working area of approx. 2 - 3 m².
•
Use a soft base, such as a cardboard box or carpet, for assembly so that the surfaces
are not damaged during assembly.
•
Remove the parts from the packaging and check the completeness of the individual
parts before assembly.
•
Every precaution has been taken at the manufacturing facility to avoid sharp edges on
this grill. Handle the parts with care to avoid accidents or injuries during assembly and
start-up.
•
If necessary, work in pairs.
•
Keep the required tools (cross-headed screwdriver and adjustable wrench) within
reach.
•
Do not tighten all screw connections until the unit has been completely assembled.
•
If, despite checking at the factory, something is missing, contact our customer service
department (last page).
•
We reserve the right to make minor technical changes to the device, especially with re-
gard to the content of the mounting material.
•
Some parts are already pre-assembled with other parts at the factory. Most of the fas-
tening material is screwed into the parts.
Unscrew first before assembly
Set-up time
ca. 60 min.
