ONLY BY SDS
back to
Previous page
Temperature:
the products placed
inside the Porter Activ shouldn’t have a
higher temperature than 100 °C. A digital
thermometer (optional) can be applied to the
Polibox® for temperature control. Observe the
requirements of standard UNI EN 12571:1999
for the correct temperature maintenance.
Handling and transport:
due to the
type and thickness of the material, the box
is lightweight, without sharp edges and
protrusions, both to protect the safety of the
operators during handling and transport,
as well as to avoid accumulation of dirt in
the corners. However, it is recommended to
use proper hand trolleys; it is possible to use
the optional trolley. In general you should
observe the company procedures for the
correct handling of loads.
Food safety:
polypropylene is a material,
suitable for contact with food substances. It
doesn’t release either smell, or taste to foods
and it can be easily washed and sanitized after
use. The boxes Porter Activ are suitable to
protect the food against thermal stresses, due
to the insulating properties of the polymer
foam, which has a coefficient of resistivity
(lambda) of 0.039 W / mk and ensures a
thermal loss according to standard UNI EN
12571:1999.
Cleaning instructions:
ATTENTION:
Disconnect the product from
the network before cleaning
the plate and
close the socket
protector.
Don’t clean the hot plate under running water
or pour a liquid product on it, but use a wet
cloth, both for the inner and outer box surface.
The isothermal box can be washed and
sanitized in a dishwasher, in industrial cleaning
centres, with direct water jet, with high-pressure
machines, with steam machines (up to 100°C)
or by hand. All detergents and disinfectants
can be used for the cleaning provided they
don’t contain products derived from petrol
and trichloroethylene. It is recommended to
wash the box both internally and externally in
order to ensure a perfect hygiene level. Very
important: the box has to be completely dry
after washing; the drying has to be carried out
with overturned and open box.
Reaction to fire:
the isothermal box has a
1 class fire reaction and has to be kept away
from open fire. It cannot be exposed to higher
temperatures than 100°C.
Recycling.
The boxes, once separated from the metallic and electric part, can be collected at recycling plants
and milled. The boxes can be collected in recycling plants and be grounded. The resulting product
is normally used to produce new packaging or products that are used in the building industry like
lightening components. The box is 100% recyclable.
Disposal.
The metallic part and the electric cabling have to be separated from the polypropylene for
disposal. The plate is disposed with metal, the electric part with the electric-electronic ones. The
boxes are disposed in the plastic. Polypropylene incinerated at higher temperatures than 900 ° C,
has carbon dioxide (CO2) and water (H2O) as residues released into the atmosphere. The product
is chemically inert, it doesn’t pollute either the air or groundwater.
Warranty on manufacturing defects.
With the exclusion of any legal claim, SDS Ltd. provides free of charge repair or replacement within
the warranty period of the law to all the defect found parts, provided it is shown, that the defect is
not derived from uses different from the ones described in this manual, from overuse or from use
contrary to the detailed instructions in the preceding paragraphs. The warranty is strictly limited
to the repair or replacement of parts supplied by us and doesn’t accept any claims based on
damages to people, property or loss of production.
