ACTiSYS Corp.
48511 Warm Springs Blvd., Suite 216, Fremont, CA 94539
Tel:510-490-8024, Fax:510-623-7268, www.actisys.com, irda- [email protected]
ACT-IR910SW IrDA Protocol Recording/Analysis Software
(c)Copyright 2000-2002, ACTiSYS Corp. (10/22/2001, ver1.0)
========================================================
***Important Notice***
1) You must read the readme.txt carefully before you start use it.
If you were not, you would lose some information. Missing any
You will need a real DOS system with at least one free COM port.
information will make it difficult to analyze IrDA protocol traffic.
2) You will need a real DOS system (not emulated DOS under Windows)
with at least one free COM port.
IR910SW records IrDA protocol conversation from 9.6K to 115.2 Kbps.
It works together with ACTiSYS IrDA PC RS232 Dual head adapter, IR910D.
You will need a real DOS system with at least one free COM port.
It does not decode OBEX or any other layers above IrLMP.
But all the information are preserved for you to read. Please see
the sample output LOG_LMP.TXT attached.
This sample is an OBEX session.
Timing information down to byte level are shown in the
LOG_PHY.TXT output file. Please see the sample file attached.
This is a three-step process. Step one is to record the IrDA traffic. Step two is to translate the
recorded data to text files. And step three is to view the text files.
(I) Recording Data
Run either "COM_1.EXE" with IR910D at COM1, or "COM_2.EXE" with at COM2.
You need to run under real DOS, not emulated DOS under Windows.
