The Wireless Connectivity Expert
ACT-IR9201 User’s Manual
ACTiSYS Confidential Information
Page 5 of 10
Oct.2nd, 2006
Version 1.0
3 ACT-IR9201
INSTALLATION
Please follow the following installation instruction to install ACT-IR9201.
1. This is ACT-IR9201 OVC BOX.
(Optical Power To Voltage Converter)
2. Connect the Double BNC male connector to OVC Box as shown on the picture.
3. Connect photodiode (UDT PIN 10D) to double BNC male connector.
Note: DON’T touch the window of the photodiode.
4. Connect BNC cable to the OVC BOX.
(Note: The other end of BNC cable link to Digital Oscilloscope and set probe to 1X)
5. Turn ON the Oscilloscope and OVC BOX.
Copyright 2000-2006 ACTiSYS Corp
