background image

The Wireless Connectivity Expert

ACT-IR9201 User’s Manual

 

 

ACTiSYS Confidential Information 

Page 8 of 10 

Oct.2nd, 2006

Version 1.0

 

7 PRECAUTIONS 

 

To ensure trouble-free operation, please observe the following precautions: 

Optical communications are easily affected by external light sources, weak batteries, transfer 

distance, transfer angle, etc. Any of these conditions may cause a data transfer failure, 

incomplete, missing or incorrect data. Make sure that the wireless interface is away from direct 

sunlight and other strong light source. 

 

 

Do not terminate arbitrarily during file transfer process between DUT and computers   

            until finished. Otherwise DUT internal data integrity may be damaged, which is due   

      to the violation of DUT’s. 

 

Do not expose the unit to moisture, as this will damage the internal circuitry. 

 

Do not expose the unit to extreme temperatures. It should not be placed in direct sunlight or in a 

closed vehicle, neither should it be placed near heaters nor other heat sources. 

 

Do not store the unit in a humid or dusty place. 

 

Use a soft, dry cloth to clean the unit. Do not use a wet cloth or any solvent. 

 

Do not drop the unit or handle the unit carelessly. 

 

CAUTION: 

 

Never touch the pins of computer connection terminal. The internal circuits can be damaged by a static 

Electricity discharge. If this device requires any servicing, use only an ACTiSYS service dealer, an ACTiSYS 

approved service facility, or an ACTiSYS repair service. 

 

When exchanging data with host computer, be sure the appropriate serial communication port is available 

and is not in conflict with other peripheral device or software. 

 

 

NOTE: 

Must be used with shielded cable only.

 

FOR YOU RECORDS 

For your assistance in reporting this product in case of loss or theft, please record below the model 

number and serial which are located on the bottom of the case. Please retain this information.

 

Model Number: 

Serial Number: 

Date of Purchase: 

Place of Purchase: 

All indicated copyrights and trademarks in the following pages are copyrights and trademarks of 

their respective corporations. 

 

 Copyright 2000-2006 ACTiSYS Corp 

Содержание ACT-IR9201











Отзывы: