The Infrared Wireless Expert
ACT-IR8200D
Design Specification
2) Discovery time should be 3 seconds in general, if you want the discovery process faster, you
can change it.
3) Discovery slot also can make discovery process faster.
The third page is to set the IrDA protocols when IR8200D is in Primary.
There is another choice for customer if you don’t want change the parameters by program but
manual, or you already soldered IR8200D on PCB. The PB7~PB0 pins on IR8200D can be
configured host baud rate and hardware flow control signals to fit your requirements, but you can
change the Primary protocol or discovery time or slot here. Please see the pin description to get
information.
© Copyright 2004 ACTiSYS Corp. Page 14 of 20
Nov. 10, 2004
Rev. 0.2
