ACTiSYS ACT-IR100UD, Руководство пользователя

Страница: 19 / 22

The Infrared Wireless Expert
ACT-IR100UD
User Manua l
©
Copyright 2008-2010 ACTiSYS Corp.
ACTiSYS Confidential Information
19 of 22 Jul 27, 2010
Ver. 1.0.2
9.4 The Third Tab: Primary Protocol Settings
This is to set the IrDA protocols when ACT-IR100UD is in Primary Mode as per application.
•
[Save Configuration Note]
: If you change any parameter, be sure to click “ Send ” button on the tab
you have changed first. Then click “ Save Config into Flash ” so that all the changes can be saved
successfully as above figure.
9.5 Factory Default Settings
ACT-IR100UD is configured for the following factory default settings.
Configuration Parameter Default Setting Value Customization Option
Host baud rate 115.2 Kbps Can be changed through config setting
Data format 8N1
Device role mode Primary/Secondary Can be changed through config setting
Primary protocol IrCOMM 9 wire Can be changed through config setting
Ignore DSR/CTS No (Active) Can be changed through config setting
Discovery time 3 seconds Can be changed through config setting
Discovery slots 6 Can be changed through config setting