ACTiSYS ACT-IR100UD, Руководство пользователя

Страница: 16 / 22

The Infrared Wireless Expert
ACT-IR100UD
User Manua l
©
Copyright 2008-2010 ACTiSYS Corp.
ACTiSYS Confidential Information
16 of 22 Jul 27, 2010
Ver. 1.0.2
9. COMMUNICATION PARAMETER SETTINGS
Above is a configuration utility to set parameters as per need. You can open this utility from:
Start => Program => ACTiSYS => ACT-IR100UD => ACT-IR100UD.
1. Plug in ACT-IR100UD dongle to USB port.
2. Check the correct COM port number which it is connected (Refer to section 6.2 “COM Port
Check”).
3. Then select the correct COM port number at “ Port ” of “ COM PORT ” field as below figure. E.g., If
your COM Port is 14, then you will see “ACTiSYS IR100UD READY” message as shown in
below figure.