Technical Accuracy
To the best of our knowledge the information contained in this document
was correct at the time it was produced. Active Research Ltd cannot accept
liability for any inaccuracies or omissions.
The products described in this manual and the specifications thereof may be
changed without prior notice. Active Research Ltd cannot accept any liability
for differences between the product and this document. To check for updated
information and specifications please check actisense.com.
Active Research Ltd will not be liable for infringement of copyright, industrial
property rights, or other rights of a third party caused by the use of
information or drawings described in this manual.
Product Guarantee
This product comes with a three year ‘return to base’ guarantee. If you
suspect that the unit is faulty please refer to the Troubleshooting Section of
the User Manual before contacting support.
It is a requirement of the guarantee that all installations of electronic
equipment follow the NMEA 0400 specification. Any connection to a battery
or power supply must meet the mandatory essential safety requirements that
may be imposed by local regulatory agencies.
Actisense products are intended for use in a marine environment, primarily for
below deck use. If a product is to be used in a more severe environment, such
use may be considered misuse under the Active Research Ltd guarantee.
Important Notices
The device to which this manual relates complies with the Electromagnetic
Compatibility requirements according to EN60945. The unit should always
be used in conjunction with appropriately approved, shielded cable and
connectors as per NMEA 0400 to ensure compliance. A declaration of
conformity is available for download at www.actisense.com.
If the device to which this manual relates is to be installed within five metres
of a compass, please refer to the ‘Compass Safe Distance’ section in the
‘Technical Specifications’ table available on the Actisense website.
Trademarks and Registered Trademarks
Actisense® and the Actisense logo are registered trademarks of Active
Research Limited (Ltd). All other trademarks are the property of their
respective owners.
The NMEA® name and NMEA logo are copyright held by the NMEA. All uses in
this manual are by permission and no claim on the right to the NMEA name or
logo are made in this manual.
Fair Use Statement
The contents of this manual may not be transferred or copied without the
express written permission of Active Research Ltd.
Copyright © 2017 Active Research Ltd. All rights reserved.
Quick Network Block
Quick Start Guide
QNB-1
Product Registration
Please register your product via the online form at http://actisense.com/
support/prodreg.html.
Your product package includes a unit serial number. The serial number is six
digits long and can be found below the barcode on the label. Your registration
will assist Actisense Support to link your product to your details, simplifying
any future assistance you may require.
Product Disposal
Please dispose of this product in accordance with the WEEE Directive.
The product should be taken to a registered establishment for the disposal of
electronic equipment.
Issue 2.00
21 Harwell Road
Poole
Dorset
UK, BH17 0GE
Tel: +44 (0)1202 746682
Email:
Web:
www.actisense.com
Introduction & Features
The Actisense QNB-1 provides instrument drops for up to six NMEA 2000
devices offering a flexible alternative to multiple T-pieces and reducing the
cost of an NMEA 2000 installation.
The QNB-1 is available in two versions:
The QNB-1-PMW version is fitted with six standard NMEA 2000 M12 (Micro-
fit) female connectors which allow ‘plug and play’ connections for quick and
easy installation. A Raymarine STNG backbone can be wired to one side of
the QNB-1 to combine standard NMEA 2000 with STNG without the need for
adapter cables.
The QNB-1 version is fitted with glands to allow for installation of custom
lengths of cable. This is a great option for ‘mix & matching’ standard NMEA
2000 devices with Raymarine STNG devices.
Both versions are fitted with LEDs that provide information during set up
and use to indicate the presence of data, power status, polarity and to show
