background image

CONNECTION CABLE

INSTRUCTION MANUAL

Thank you for purchasing this Icom product.
The OPC-2275 

CONNECTION

 

CABLE

 is used to connect a 

transceiver to the VE-PG3.
READ ALL INSTRUCTIONS carefully and completely be-
fore using the cable.

CONNECTING THE  OPC-2275

CAUTION

• Verify that both the transceiver and the VE-PG3 are turned OFF when connecting or disconnecting the cable.
• Hold the connector body when connecting or disconnecting them.

• Never bend or pinch the cable.
 • Never place a heavy object on the cable.
• Never touch the cable with wet hands.
• Always connect the cable correctly. An incorrect connection could damage the VE-PG3 and/or the transceiver.

Set the transceiver channel, volume level, TX output power, and other necessary settings.
(See the transceiver and the VE-PG3 instruction manuals for setting details.)

1

Turn OFF both the transceiver and the VE-PG3. Remove the microphone and external speaker from the transceiver, 
and then connect the OPC-2275, as shown below.

2

VE-PG3 (Rear view)

Icom’s transceiver
(IC-F5060/IC-F6060 series)

(Rear view)

(Front view)

To the external speaker jack

To the microphone connector

LINE2

LINE1

PHONE

• The [TRX1] and [TRX2] ports (upper slots) accept the OPC-2275 connectors, 

 however, follow the example to correctly connect the transceiver to ONLY the [TRX1] on the VE-PG3.

A B C

Be sure to insert the 
connectors top side up.

Bottom

Top

A

1

2

3

4

OPC-2275

A

A B C

To [TRX1] (Upper slots)

Connector 
body

Connector 
body

Connector 
body

When other cables are connected, you can 
use  needle-nose pliers to carefully insert or 
remove connectors.

VE-PG3 (Rear view)

VE-PG3 (Rear view)

Needle-nose pliers

Needle-nose pliers

NEVER pull the connector by holding the 
cable. This will damage the cable. 

*If the cable becomes damaged, replace the 

connector(s).

 

See “REPLACING THE 

CONNECTOR” on the reverse side for  
replacement details.

Отзывы: