ActionTec UD800TP, Руководство пользователя

Страница: 16 / 47

13
Chapter 2 Setting Up the Modem
Configuring the Modem
The following procedure details the steps involved in configuring the Modem to
activate the
DSL
connection and load the software drivers. The Information
Worksheet from the Internet Service Provider (
ISP
) must be available to complete
this procedure. If this document has not been received, contact the
ISP
immediately.
1. Insert the rectangular end of the USB cable into a USB port on the front or
back of the computer.
☞
Note : A USB port is shaped like a thin rectangle about 1 /
4
inch
by 1 /
2
inch, and may be vertically or horizontally oriented.
2. Power up the computer. After the computer boots, Windows detects the
Modem. When the “Add New Hardware Wizard” window appears, select
Search for the best driver for your device (Recommended) by clicking the
circle next to the text, then click Next .
☞
Note : The windows shown in steps 2 through 5 are for Windows
98. Your windows may appear slightly different.