manualshive.com logo in svg

ActionTec DataLink V.90 FM560LKI, Руководство пользователя

Поделиться
Скачать
ActionTec DataLink V.90 FM560LKI Скачать руководство пользователя страница 18

18

Installing and Configuring Software

INSTALLING COMMUNICATIONS SOFTWARE

If your modem came with a communications software package, it is strongly rec-

ommended that you use this software for your modem.  It’s default installation

parameters have been specially configured to work with this modem. The included

software supports both data and fax modes. To install this software on your com-

puter, follow these easy steps.

Step 1: Insert the diskette containing the communications program into your

computer’s floppy disk drive.

Step 2: If you are using Windows 95/98, go to 

My Computer

 and double-click

the 

floppy drive

 icon. Double-click the 

setup.exe

 file to install the soft-

ware in Windows 95/98. If you are using Windows 3.1X, go to 

File-Run

and type in the floppy drive letter followed by 

setup

. This will load the

software for use by Windows 3.1X.

If you wish to use another software package, please be sure that it supports this

modem. Most software manufacturers have a listing of supported modems on their

websites or BBS’s. Check these sites to see if this model is supported. If you are

unsure, or your brand of software supports only a few modems, try selecting “Hayes

Compatible” or “Standard Modem”. This may work in certain cases. Some soft-

ware programs allow manual input of parameters. For the users of these programs,

here is a listing of the data/fax command standards supported.

Data:

TIA/EIA-602

Fax:

TIA/EIA-578 for Class 1 Fax

Init String:

AT&F&C1&D2W2

Note: Some programs must be configured to communicate with the mo-

dem on the same COM port and or IRQ setting  used by the modem.

Содержание DataLink V.90 FM560LKI
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды