4
04
OFF
ON
OFF
ON
01
02
OFF
ON
ON
Turn 3-way switch to “On”.
Turn on water supply. Foam will take several minutes to spurt out.
Note: Volume of foam flow will gradually increase.
Unscrew the water tank cover and empty out remaining water
.
Refill the mixed solution
into the water tank, tighten the tank cover.
Re-insert green nozzle to green connector. Turn
3-ways switch to “On” and turn on water supply.
REFILL INSTRUCTIONS
Ⅳ
If foam runs out, follow these steps.
Pull off green connector from water tank, water may spurt from the
water tank nozzle. (Note: Gray part of connector may cause a
pinch if touched while removing.)
Turn the 3-way switch to “Off ”.
