2
Attach water sprayers to corresponding numbered pads on the water slide.
Unscrew valve. (To use waterslide without foam, leave valve
closed, do not attach foam sprayer.)
Attach foam sprayer to valve, twist to lock tight.
Secure water hose from top to bottom of waterslide with
Velcro attachments. Check to be sure that any part of
hose is not twisted.
Attach the hose to water supply before turning water on.
03
Press blower switch to “On”. If blower does not turn on, press
reset button on the GFCI plug. The blower will remain on to
provide continual airflow while the waterslide is in use.
Secure water slide to the grond with ground stakes.
WATER SPRAYERS AND FOAM SPRAYER INSTALLATION
Ⅱ
1
1
1
1
2
2
2
2
Velcro pad
