actionair 2506-138-101, Руководство пользователя

Страница: 3 / 24

ADDRESSING THE FANS USING EC CONTROL SOFTWARE
ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice.
Copyright © 2016 Actron Engineering Pty. Ltd.
Hercules Units w/ CM100- Addressing the Fans Using EC Control Software
9590-7005 Rev. 5.0 220201
Page 3 of 24
1.0 SAFETY PRECAUTIONS
•
Only licensed HVAC technicians* should install and service this air conditioning equipment. Improper service or
alteration by an unqualified technician could result in significant and major damage to the product or property which
may render your warranty null and void. Such unqualified service could also lead to severe physical injury or death.
Follow all safety instructions in this literature and all warning labels that are attached to the equipment.
•
Prevailing WH&S regulations must be observed and will take precedence to the safety instructions contained on
this manual. Safe work practices and environment must be the paramount importance in the performance of all the
service procedures.
•
Ensure that unit installation complies with relevant council regulations and building code standards.
•
All electrical wiring must be in accordance with current electrical authority regulations and all wiring connections to
be as per electrical diagram provided.
•
Secure the fans against accidental contact. Beware of pinch point and sharp edges which can cause cutting injury.
•
Always wear appropriate PPE, remove any dangling jewelery and protect long hair by wearing a cap.
•
Make sure that safety guards and panel covers are always firmly secured and not damaged before and during
operation of unit.
•
This appliance is not intended for use by young children or infirm persons unless they have been adequately
supervised by a responsible person to ensure that they can use the appliance safely. Young children should be
supervised to ensure that they do not play with the appliance.
•
Installer must incorporate a means of electrical disconnection (isolator) in the sub mains fixed wiring in accordance
with the latest edition of the AS/NZS 3000 (also known as Australian Wiring Rules).
•
Secure the power cords and control cables that goes in/out the unit. Use the cable ties provided in the control box.
•
This unit is designed for use with R-410A refrigerant only.
*Qualifications required will be appropriate Electrical, Refrigeration and Refrigerant Handling License and Training
dependent on local State/Territory regulations.
DANGER
Hazardous Voltage - Risk of Electrocution.
TURN-OFF the power from main isolator before proceeding with any service work of the unit. Observe proper LOCK-
OUT/TAG-OUT (LOTO) procedures for electrical appliances in order to prevent accidental switching-on of the power
supply. Extreme care and caution must be observed should there be a need to work on live circuit.
WARNING
EC Motors and compressor variable drives are fitted with high power capacitors and can have dangerous residual
voltages at motor terminals after power has been isolated.
Wait at least 5 minutes after power isolation and test for any voltage before beginning service work.
CAUTION
Beware of Rotating Fans!
Ensure that indoor and outdoor fans are isolated and have come to a complete stand still before servicing the
equipment. Beware of pinch point and sharp edges which can cause cutting injury. Secure the fans against accidental
contact.
Always wear appropriate PPE and remove any dangling jewellery and protect long hair by wearing a cap. Ensure that
no loose clothing can be caught / entangled in moving parts.
CAUTION
Potential Confined Space !
Be aware of potential confined space condition in the internal sections of the unit. WH&S Confined Space regulations
and safety procedures should always take precedence when working in these environment.
VISUAL INSPECTION AND WORK ASSESSMENT
Work areas and conditions must first be assessed and evaluated for any potential hazardous conditions. It is also
important to be familiar with the unit parts and components before proceeding with any service task.