Action Sports S001049, Руководство пользователя

Страница: 21 / 32

©
ACTION SPORTS EQUIPMENT PTY LTD – www.actionsports.com.au Page: 21
SECTION 2 - MAIN FRAME ASSEMBLY
Assemble the Main Frame using the provided tools Wrench and Allen Key.
Note:
1) At least two people are required to erect the Main Frame and Leg Tubes.
2) Make sure legs are positioned so that frame legs are on level ground, with ground peg holes facing out and away from
swing.
Figure 10
1) With one end of main frame resting on ground, raise opposite end and loosely secure the left leg tube (A11), the right leg
tube (A12) with (A6) bolt and nut x 4. Check the base of the two leg tubes, the base plate should have a hole on the
outside of the unit (see diagram).
2) Raise end of main frame resting on ground to level parallel with ground.
3) Attach the play fort to main frame with (F6) bolt and nut x 4. Add side brace (D17).
4) Once level, tighten all main frame screws and place Anchor Pegs (X5) x 2 into footplate holes. Ensure anchor pegs are
hammered completely in so they do not become a tripping hazard.
At the beginning, do not over tighten the screws when assembling the Legs (Part# A11 & A12) to the Top Support
Tube (Part# A10). This will make it easier to make final alignment and adjustment. Once all screws have been
properly installed, tighten them securely with wrenches or socket set.