ACTinBlack MUM-14, Руководство оператора

Страница: 33 / 59

34
2-13
WARNING
DO NOT ATTEMPT TO ROTATE THE
SWING ARM WITHOUT LOOSENING THE
ADJUSTMENTKNOBANDDISENGAGINGTHE
LOCKING SPLINES ON THE SHAFT. FAILING
TO DO SO MAY RESULT IN PERMANENT
DAMAGE TO THE SWING ARM ADAPTER.
2-13 Installation of Weapon Mount:
Perform the following procedure to install the weapon mount.
CAUTION
THE MUM-14 IS NOT A WEAPON
SIGHT, HOWEVER, IT CAN BE USED IN
CONJUNCTION WITH A COLLIMATED DOT
SIGHT OR LASER AIMING DEVICE.
NOTE
IT IS RECOMMENDED THAT THE EYECUP
BE REPLACED WITH THE SHUTTERED
EYEGUARD DURING WEAPON
MOUNTED USE.
1. Orient the monocular and weapon mount as shown in
Figure 2-11.
2. Pull down on the weapon mount release lever.
3. Slide one of the two mini dovetail rails of the MUM-14 into
the weapon mount alignment groove.
4. Release the release lever and ensure it is locked into the
mini dovetail rail of the monocular.
5. Loosen the clamping screw of the weapon mount.
6. Position the weapon mount with the monocular onto the
weapon’s mounting rail.
7. Fasten the monocular onto the weapon by securely
2-14
tightening the clamping knob.
8. Check the position of the monocular by holding the weapon
in your normal firing position. Adjust the fore/aft position
of the monocular as necessary by loosening the clamping
screw and repositioning the weapon mount on the weapon’s
mounting rail.
Figure 2-11 Weapon mount Installation