Click & Go Extreme Cold Chain EU868 Quick Starter Guide – V1.0
5
3.4.2
Pole Mount
By default, the LoRa IoT Station is delivered with a U-bolt to be mounted on a pole of a maximum diameter of
60mm.
To fix the U-bolt, it is recommended to use nuts provided in the mounting kit.
For safety reason, the metallic moun2ng kit must own a good earth connec2on. This may be ensured by a good
earth connec2on on the metallic pole since the U-bolt is conduc2ve.
3.4.3
Metallic strapping Mount
The LoRa IoT Sta2on can be also mounted on a pole by strapping. The maximum acceptable width of the
strapping is 25mm. It is recommended to use 2 metallic strappings as described on the figure below:
Long Range IoT Station
Installation and
Maintenance
Manual
Reference:INSTALL_Long_Range_IoT_
Station
Version ........ 1.0
Author ......... Lénaïc LOUVEL / Samuel
NICOLAS
Date ............. 08/04/2015
Classification
level
1 - Internal use only
2 – Confidential
3 - Confidential limited
This document is owned by
KLK
and can not be distributed, used and/or reproduced without
KERLINK
written
authorization.
Page
19
/
31
Figure 14 : Universal antenna support dimensions
6.3.3
Pole mounting by U-bolt
By default, the LoRa IoT Station is delivered with a U-bolt to be mounted on a pole of a maximum diameter
of 60mm.
To fix the U-bolt, it is recommended to use nuts provided in the mounting kit.
Figure 15 : Pole mount set on the enclosure
U-bolt
1 nut on each side
Long Range IoT Station
Installation and
Maintenance
Manual
Reference:INSTALL_Long_Range_IoT_
Station
Version ........ 1.0
Author ......... Lénaïc LOUVEL / Samuel
NICOLAS
Date ............. 08/04/2015
Classification
level
1 - Internal use only
2 – Confidential
3 - Confidential limited
This document is owned by
KLK
and can not be distributed, used and/or reproduced without
KERLINK
written
authorization.
Page
22
/
31
6.3.5
Metallic strapping mounting
The LoRa IoT Station can be also mounted on a pole by strapping. The maximum acceptable width of the
strapping is 25mm. It is recommended to use 2 metallic strappings as described on the figure below:
Figure 19 : Pole mount set using strapping
Figure 20 : Pole mounting of the universal antenna support using strapping
For safety reason, the metallic mounting kit must own a good earth connection. This may be ensured by a
good earth connection on the metallic pole if strappings are conductive.
6.4
Setting connections
6.4.1
Ethernet connection
Before connecting the Ethernet wires, ensure that the POE injector is not connected to 230VAC.
Strapping
Alternative Strapping
positions
