13
/ 42
Supported Module Configurations with Legacy Serial ADI Drive Sleds
actiLib Kodiak 3407 supports serial ADI sleds from actiLib LTO 1U/2U/4U and actiLib Kodiak 6807 Tape
Libraries. One drive power board (DC-DC converter) is required in each module that includes one or more
serial ADI drive sleds. Table 2 describes the supported serial ADI configurations for each module type
–
Base Module and Expansion Module.
Module Type
Power Supplies
Drive Power Boards
Tape Drives
Base
1 (standard)
or
2 (redundant)
0 (standard)
0
1
Up to 3
Expansion
0 (standard)
0 (standard)
0
1 (required with 1 or more drives)
or
2 (redundant)
0 (standard)
0
1
Up to 3
Supported Tape Drives
actiLib Kodiak 3407 was developed to integrate industry-standard LTO Ultrium tape drives from both HP
and IBM.
Mixed drive generations and mixed interfaces are supported within a single library and within a single
module.
Listed below are the tape drives that have been implemented and qualified for use in actiLib Kodiak 3407
.
IBM LTO Drives
HP LTO Drives
LTO-6 Half-Height FC Single Port
LTO-6 Half-Height FC Dual Port
LTO-6 Half-Height FC Dual Port
LTO-6 Half-Height SAS Dual Port
LTO-6 Half-Height SAS Dual Port
LTO-7 Half-Height FC Single Port
LTO-7 Half-Height FC Dual Port
LTO-7 Half-Height FC Dual Port
LTO-7 Half-Height SAS Dual Port
LTO-7 Half-Height SAS Dual Port
LTO-8 Half-Height FC Single Port
LTO-8 Half-Height FC Dual Port
LTO-8 Half-Height FC Dual Port
LTO-8 Half-Height SAS Dual Port
LTO-8 Half-Height SAS Dual Port
