www.acti.com
Hardware Manual
6
Maintenance
If there is dust on the front glass surface, remove the dust gently using an oil-free brush or
a rubber dust blowing ball.
If there is grease or a dust stain on the front glass surface, clean the glass surface gently
from the center outward using anti-static gloves or an oil-free cloth. If the grease or the
stain still cannot be removed, use anti-static gloves or an oil-free cloth dipped with
detergent and clean the glass surface gently until it is removed.
Do not use organic solvents, such as benzene or ethanol when cleaning the transparent
dome cover.
Never look at the transmit laser while the power is on. Never look
directly at the fiber ports and the fiber cable ends when they are
powered on.
Use of controls or adjustments to the performance or procedures
other than those specified herein may result in hazardous laser
emissions.
