www.acti.com
Hardware Manual
16
Waterproof the Power Cable
(Optional) If a non-PoE switch will be used, connect the camera to a DC 12V power source.
Connect the power cable and then wrap the cable with waterproof tape.
NOTE:
If the DC 12V connector will not be used, wrap it also in waterproof tape to avoid short
circuiting the connector.
Avoid short circuit when insulating the cables.
Use self adhesive waterproof tapes that will stick together with the twisted cables.
Tighten waterproof tapes when wrapping the cables and make sure the cable connections
are fully covered.
You are recommended to put the cables in a waterproof junction box which needs to be
purchased separately.
