TCM-6630 Hardware User’s Manual
point to complete the auto-pan setting.
END POINT
Users are able to set the end point after the start point is defined. Pan the dome to another
position and press <ENTER> to save the position as the end point.
DIRECTION
The item is for setting the AUTOPAN direction of speed dome camera. The speed will start to
pan clockwise from the start point to the end point if your selection is <RIGHT>, and then
return to the start point. The speed dome will start to pan anti-clockwise from the start point to
the end point if your selection is <LEFT>. Refer to below diagram.
SPEED
The item is for defining the speed dome camera rotation speed while running auto-pan. The
speed is adjustable from 1 to 4; refer to the table below for details.
PAN
(degree/sec.)
Speed 1
10
Speed 2
23
Speed 3
35
Speed 4
45
RUN AUTOPAN
After the setting is completed, select this item to manually execute the Auto-pan function.
NOTE:
The tilt and zoom value of the start point will be
recorded and fixed for the selected auto-pan line.
