![ACTi TCM-6630 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/acti/tcm-6630/tcm-6630_user-manual_2842743013.webp)
TCM-6630 Hardware User’s Manual
5) Dome ID Setting
Use the switch to change your speed dome ID by turning the arrow to change each digit to the
desired number. For instance, if the Speed dome ID is 123, the ID switch should be set as below:
6) Communication Switch Setting
The table below shows the function of each pin within the Communication Switch
Communication Switch
Pin 1
RS-232 Setting (Reserved)
Pin 2
Pin 3
Termination
Pin 4
Line Lock
Pin 5
System Initialization (for
upgrade)
Pin 6
Reserved
RS-232 is reserved for internal use only; The Pin 3 and Pin 4, they are used for termination and
Link Lock adjustment respectively. The Pin 5 is mainly used for return to factory default of camera
setting.
7) Suspension Loop
This metal cable loop is used to suspend Speed dome from mounting accessories during
installation so that it does not fall down by slipping.
NOTE:
I
f controlling through an ACTi decoder via analog means such as a
keyboard or DVR, no two speed domes should be given the same ID or
communication conflict may occur. When controlled only through Ethernet
and software (without the use of an ACTi hardware decoder), the dome ID
setting may be ignored.