1.3 CONNECT NECESSARY CABLES
The BNC cable for video input, Ethernet cable and power cable are necessary for
previewing function. Make sure all cables are correctly and firmly connected.
1. Connect an analog video source (e.g. CCD Camera) to SED-2100 Video In (BNC connector)
2. Connect an analog monitor to SED-2100 Video Out (BNC connector)
3. Connect SED-2100 LAN port to an Ethernet hub (RJ45 connectors)
4. Connect a PC to the Ethernet hub (RJ45 connectors)
5. Connect the power adaptor to SED-2100 (2pin terminal block connector)
NOTE:
When the LAN port yellow LED start flashing, means SED-2100 start
streaming
