Standalone NVR Quick Installation Guide
5
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network cameras
and required peripherals. Please remember to enable the DHCP service on your
router for INR to obtain an IP address automatically.
START-UP
ATTACH THE FRONT COVER
After you finish configuring INR system, remember to lock the disk trays using
the provided keys and attach the front cover to the unit’s front panel.
Step 2
Press the latch and push the right end
Step 1
Align the left end hooks
to the holes on the
unit’s left handle.
1. On the unit’s rear panel, press down the
Power Switch
to the side with “ l ” mark.
2. On the unit’s front panel, press down
Power Button
to turn on the unit.
3.
As this unit starts up, you will enter Windows logon screen, and input the
password “
123456
“ to log in as administrator.
towards the unit’s right
handle until it clicks
into place.
Without Front Cover
With Front Cover
Note
To assign a static IP address to INR, enter
Windows and configure the network
settings in
Network and Sharing Center
.
Power Source
eSATA Storage
USB Devices
Monitor
Switch
Cameras