Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
ATTACH THE FRONT COVER
After
finishing
installing
the
disks,
attach
the
front
cover
to
its
front
panel.
Step 1
Hook the left end of the cover onto
the
chassis’
left
ear.
Step 2
Fit the free end of the cover onto the
unit.
CONNECT THE DEVICES
The example below displays a network consisting of only INR, network
cameras and required peripherals. Please remember to enable the DHCP
service on your router for INR to obtain an IP address automatically.
Switch
Cameras
Power Source
USB Devices
Note
To assign a static IP address to INR, enter
Windows
and
configure
the
network
settings in
Network and Sharing Center
.
Note
Please make sure
both power cords are
fully inserted.
VGA Monitor
START UP
1.
On
the
unit’s
front
panel,
press
down
Power Button
to power on this unit.
The power status indicator will turn green.
2. On Windows logon screen, input the password “
123456
“ to log in as an
administrator.
Standalone NVR Quick Installation Guide
6
