ACTi ENR-110, Руководство системного администратора

Страница: 116 / 148

www.acti.com
ENR-
100 Series System Administrator’s Manual
116
(B) Motion Settings
After selecting the camera from All Cameras list
, click “
Motion Detection
”. If this camera is
in dual stream mode, only Channel ID 1 (Stream 1) supports motion detection feature.
On Motion Detection Settings window,
check “
Enable
” then click “
Motion Setup
”. To
enable one motion region, check it, a color frame will appear in the view. You may start
setting the detection area by adjusting this yellow frame on the view. Simply use your mouse
to move and resize the frame. Click “
Apply
” to save the settings.
Adjustment Attributes
Field Name Description
Sensitivity(1-100) Determines how sensitive the camera reacts to the movement. The higher
the sensitivity level is, the smaller motion will trigger the alarm, but may
give false alarms. Default is 70.
B
V
To move the frame
Place the mouse
cursor over the
title
bar , and drag to move.
To adjust the region
dimension
Place the mouse cursor
over the
bottom right
corner , and drag to
resize.
To disable this
detection region
Place the mouse cursor
over the
upper right
corner
, and click the “
x
”
to close this frame.