www.acti.com
Hardware Manual
29
How to Connect Audio In Device
The camera comes with an audio jack where an audio input device, such as a microphone with a
built-in amplifier, can be connected. The audio-in jack is covered by a rubber protection.
WARNING:
Do not remove this rubber protection if the audio-in jack will not be used to avoid
water or dust from entering the jack.
To connect an audio input device, do the following:
1.
Pull to remove the rubber protection.
2.
Connect the audio input device.
NOTE:
The microphone must have a built-in amplifier. Connecting an ordinary microphone
will dwarf sounds and will result in inaudible recording.
3.
If the camera is installed outdoors, be sure to wrap the audio connectors with
Waterproof
Tape
(can be purchased in hardware stores).
DISCLAIMER:
ACTi will not be responsible for camera damage due by water leakage
caused by improper waterproofing of cables.
Audio Input Jack
Audio Device
Содержание E924
Страница 10: ...www acti com Hardware Manual 10 Physical Description E924 E926 E928 E933 E925 E927 E929 4 4 4 4 4 5 5...
Страница 12: ...www acti com Hardware Manual 12 E924M E926M E928M E933M E925M E927M E929M 4 4 4 4 4 5 4...
Страница 33: ...www acti com Hardware Manual 33 10 Close the dome cover...
