Step 1:
Switch off video server by disconnecting the power cable
Step 2:
Using a suitable pointed object, press and continue to hold the Reset Button
depressed. While continuing to hold the reset button depressed, reconnect the
power cable.
Step 3:
Keep holding the reset button depressed around 6 seconds, release the reset
button. The unit will start up with factory default settings.
6.
Action LED Indicator
The LED will light up after video server has successfully completed the boot
process.
7.
LAN LED Indicator
LEDs indicating when LAN is active.
8.
Serial Port LED Indicator
LEDs indicating when serial port is active.
9.
Terminal Blocks Pin 1~6
The video server supports two alarm input and two alarm output. DI: Logic Level 0:
0~0.4V; Logic Level 1: 3.3~30V DO: Logic Level 0: 0.1~0.6V; Logic
Level1: 2.4~5V
PIN
NAME
DESCRIPTION
1
DO1 Digital Output 1
2
DO2 Digital Output 2
3
GND Ground Pin
4
DI1 Digital Input 1
5
DI2 Digital Input 2
6
GND Ground Pin
10.
Terminal Blocks Pin 7~12
Pin 7~10: RS232/422/485. Default mode is RS-485/422 auto-sensing.
Pin 11~12: DC 12V power input (Only Channel 1)
