manualshive.com logo in svg

ACT XtremeTurf, Руководство по уходу и обслуживанию

Поделиться
Скачать
ACT XtremeTurf Скачать руководство пользователя страница 7

A C T G L O B A L . C O M / S P O R T S - T U R F

  |  

E M A I L :

 

S P O R T S @ A C T G L O B A L . C O M

MAINTENANCE MANUAL

 7

Frequency

The removal of loose rubbish and surface dust should be performed on an 
as needed basis, generally about once a week depending on usage.

Do 

It is good business to protect the investment in your Act 
Global Sports Surfacing System. To do this most effec-
tively, Keep it Clean. Act Global sports surfacing systems 
are designed to resist both wear and exposure to the 
elements. The effectiveness of their materials, design 

and construction is demonstrated by the long life of fields 

under heavy use in many climates - north and south, wet 
and dry, hot and humid / cold and dry. The following are 
the most obvious precautions:

•  Control Access to your Act Global sports surfacing 

system.

•  Keep your Act Global sports surfacing system and 

close adjacent areas clean and free of litter, mud and 
debris.

•  Post signs prohibiting smoking and carrying food or 

drink onto your Act Global sports surfacing system.

•  Observe load limits for static and rolling loads, espe-

cially when surface is wet.

•  Repair minor damage promptly.
•  Follow suggested care and maintenance procedures.
•  Contact your local Act Global representative for as-

sistance with repairs, renovation work, or any further 
technical details.

Don’t 

DO NOT ABUSE YOUR ACT GLOBAL SPORTS SURFACING 
SYSTEM WITH:

• 

Vehicle traffic

•  Heavy static loads
•  Fireworks
•  Storage of materials such as drums, lumber, equip-

ment, etc.

• 

Unnecessary vehicle traffic

• 

Golfing, shot putting, javelin or discus throwing, and 

the use of long spike track or steel/rubber cleated 
shoes.

• 

Open flames, Welding, etc.

•  Use of wire brush in any form
•  Use of cleaning equipment, materials, and methods 

not authorized by Act Global.

•  High-pressure water sprays exceeding 500 PSI.
•  Vehicles with non-pneumatic tires
• 

Introduction of infills or impregnated layers other 

than supplied or authorized by Act Global.

•  Do not allow the use of bikes, skateboards, lawn 

mowers, etc.

•  Do not allow any unauthorized use
•  Improper storage, in the case of an Act Global remov-

able sports surfacing system.

Содержание XtremeTurf































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды