manualshive.com logo in svg

ACT XtremeTurf, Руководство по уходу и обслуживанию

Поделиться
Скачать
ACT XtremeTurf Скачать руководство пользователя страница 6

A C T G L O B A L . C O M / S P O R T S - T U R F

  |  

E M A I L :

 

S P O R T S @ A C T G L O B A L . C O M

MAINTENANCE MANUAL

 6

WHEN USING MACHINES,

SEVERAL POINTS SHOULD BE  

OBSERVED  

Sweepers

The sweeper should have synthetic fiber bristles such as 

nylon or polypropylene. The minimum brush length should 
be 2.5”. The maximum bristle diameter should be .030”. 

The brush must contain no metal or wire! Metal fibers 

can fall out and cause injuries to players and can also 
damage the surface.

Brush Setting

The brush setting should be monitored. The actual setting 
will of course depend on the model and type of sweeper. 
The sweeper will work best, however, when the brush is 

set so that it barely touches the tips of the turf fibers.

DO NOT SET THE BRUSH SO LOW THAT IT DIGS INTO 
THE TURF FIBER PILE OR BACKING.

 Too low a setting 

can damage the turf. Vacuum cleaners are not recom-
mended to remove mud. Contact your local Act Global 
representative if you have any questions about the type 
of machine to use or brush settings.

Temperature Limitations

Never use a motorized vacuum sweeper during the 
heat of the day if the ambient temperature exceeds 90 
degrees F. 

Turf Loading 

Limitations Brushing and brush cleaning may require 

several trips over the field to finish the operation. Any 

sweeper that weighs more than 300 lbs. should have 

pneumatic tires with a maximum tire pressure of 35 

pounds per square inch (psi). Do not park vehicles on the 

turf, especially in the heat of the day, or leave vehicles on 
wet turf for long periods of time.

Exhaust Fumes

For indoor use we recommend either electric or propane. 
The type of fuel or power used by a sweeper is of no ma-
jor importance for outdoor use. However, if the sweeper 
has an internal combustion engine, make certain that 
the hot engine exhaust is not discharged down toward 

the playing surface. Hot objects can damage the field and 

engine exhaust may soil it. Check to make sure that the 

sweeper is designed in such a way that a hot muffler or 

exhaust pipe cannot drop directly onto the surface.

Oil Spillage, etc.

Care should be taken to prevent lubricating oil, gasoline, 

grease, transmission fluids, battery acid, brake fluid, etc. 

From dripping , leaking or spilling on the turf surface 
during sweepings. Such spills can discolor the turf and 

damage the fibers and turf backing. Proper care and 

maintenance procedures should be observed in this re-

gard. Battery acid and other fluids should not be allowed 
on the surface. Never change or add fluids to mainte

-

nance equipment while on the surface.

CAUTION 

Because electrically powered units may not be properly 
grounded, do not use them on wet or damp surfaces. 

Содержание XtremeTurf































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды