ACT LASERPACK, Инструкция по установке и эксплуатации

Страница: 9 / 18

9
ACT Dust Collectors
Timer Board Programming
Familiarize yourself with the timer board manual before programming the timer board.
The table below summarizes the recommended settings. Consult with ACT Dust Collectors for specific applications.
Table – Recommended Timer Board Settings
Feature Settings
Process Current pressure drop
Last Output
The highest output terminal value that has a wire installed in it. Terminal
outputs have a range from 1-22 and are found near the bottom of the timer
board.
Time Off 10
Time On 100
High Limit
1.00” above initial pressure drop
(Contact Manufacturer for Questions)
Low Limit Starting value of 1” below high limit value
High Alarm 10 (Unless alarm is installed - Consult Manufacturing)
Low Alarm 0 (Unless alarm is installed - Consult Manufacturing)
Cycle Delay 0
Down Time Cycles 10
Auto Alarm Reset
Unless notified, leave at factory setting of 5.