ACT5prox Operating and Installation Instructions
3
Unit C1, South City Business Centre,
Tallaght, Dublin 24, Ireland
Tel: 353-1-4662570 Fax: 353-1-4520427 UK Locall: 0845 300 5204
Web: http://www.accesscontrol.ie
E-mail: [email protected]
Copyright
©
2007 Access Control Technology Ltd.
30 Second Programming Guide
(For typical Standalone System)
1. Enter Programming Mode.
On the digital keypad press button
✘
. Input the programming code (default is 9999).
The LED will flash amber.
2. Change User 1 Code
On the digital keypad press button 0. Input 01 (for User 01). Input the new User 1
code (4 digits)
3. Add User 1 Card
On the digital keypad press button 5. Input 01 (for User 01). Present User 1’s card twice.
4. Change Programming code
On the digital keypad press button 0. Press
✔
. Input the new programming code (4 digits)
5. Exit Programming Mode
On the digital keypad press button
✘
. The LED turns red and programming mode
has been exited.
5. Record User Code and Card
Enter the details of the Users and their associated codes and card numbers on the User List at
the back of this manual.
The ACT5prox is now ready for normal use.
Note:
The ACT5prox may be returned to its factory default condition at any time by entering the
programming mode and and pressing Button
✔
three times.
Act 12pp ACT5prox:Act 20pp 1.1 English 14/11/2007 13:10 Page 3
