4
|
ENGLISH
HDMI Cable
HDMI Cable
IR-TX
Cat5e/6 cable
up to 60m
IR-RX
Source Remote
Transmitter
Receiver
HDMI Source
PS3,PC,STB,Blu-ray DVD player etc
3D TV
1080p
3.0 Installation instructions
Because of the built-in EDID protocol, you need to make sure that all connected
devices are powered before the HDMI extender is switched on.
1. Connect the HDMI input source ( such as Media player, BD/DVD player etc.) to
the transmitter unit using a HDMI cable.
2. Connect the Cat5e/6 output of the transmitter to the Cat5e/6 input of the receiver
using a CAT5E or CAT6 cable with a maximum length of 60m.
3. Connect the HDMI display device (such as HDTV) to the HDMI output port.
4. Connect the IR TX cable to “IR TX” port of the transmitter; Connect the IR RX
cable to “IR RX” port of the receiver.
5. Connect the DC side from one power adapter in to the transmitter unit and one
power adapter into receiver unit and connect the AC side of both the power supply
into the wall outlet.
Installation example.
3.1 EDID
EDID can read the “Extended Display Identification Data” information from the
connected display devices. EDID is a data structure provided by digital displays to
describe its capabilities to a video source. It enables a personal computer to know
what kind of monitor is connected to it and thus the capabilities of the identified
monitor
