Acson international A4AC100C, Техническое руководство

Страница: 32 / 165

30
6.2.5 Changing Mode Set Temperature
There are 2 ways to change the mode set temperature for the Chiller.
i) [Operation Menu]
In [Operation Menu] , select “ Cool Temp” / “Heat
Temp” and press ENTER start setting or ESC to exit
to [Main Menu].
Change value via UP or DOWN button, and then
press
ENTER to confirm the change or ESC to cancel.
In [Set Parameter], select “ Regulator” and press
ENTER . Press ESC tp exit to [Main Menu] .
Select “R3”/ “R5” and press ENTER to start set-
ting or ESC to exit to [Set Parameter] menu.
Change value via UP or DOWN button. The
boarderline is limited by R5&R6 (cool),
R7&R8 (heat).
Press ENTER to confirm or ESC to cancel.
ii) [Set Parameter]
1. General
2. Sensor
3. Regulator
4. Compressor
5. Defrost
6. Antifreeze
7. Alarm and Contact
R1 Cool SP : 12.0° C
R2 Cool Diff : 3.0° C
R3 Heat SP : 40.0° C
R4 Heat Diff : 3.0° C
R5 Min Cool SP : -20° C
R6 Max Cool SP : 40° C
R7 Min Heat SP
: -20° C
OPERATION MENU
Status
: ON
Mode : Cooling
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
OPERATION MENU
Status
: ON
Mode : Cooling
Cool Temperature : 12.0°C
Heat Temperature : 40.0°C
<ENTER> <ENTER>
Summary Pages Main Menu Settings Menu
<ESC> <ESC>
<ENTER> <ESC>
Key in Password
Set Parameter
R1 Cool SP : 12.0° C
R2 Cool Diff : 3.0° C
R3 Heat SP : 40.0° C
R4 Heat Diff : 3.0° C
R5 Min Cool SP : -20° C
R6 Max Cool SP : 40° C
R7 Min Heat SP
: -20° C