manualshive.com logo in svg

Acson international 100 A/AR, Руководство пользователя, Страница: 30 / 37

Поделиться
Скачать
Acson international 100 A/AR Скачать руководство пользователя страница 30

28

1.1 CLEANING THE ELIMINATOR

Clean the eliminator about once a week (If you do not use the air filter which is special order or field supply)
with a neutral cleanser and leave it to dry in a shady location.
Clean more regularly if the air filter gets very dirty.
If the eliminator gets blocked, air will not be sucked in properly, and the cooling effect will deteriorate.
Failure to clean the eliminator may result in equipment breakdown or malfunctions.

1.4 

WHEN BEGINNING TO USE AIR CONDITIONER AGAIN.

Please turn on the power supply after checking is done and abnormality is not found.
Please do the following work.

It is confirmed that air inlet and outlet are not blocked.
It is confirmed that the earth connection line does not come off.
The earth connection line is firmly installed in the unit.
It is confirmed that there are neither lifting, blocking, nor bending of the drain-hose.

1. It is confirmed to keep the controller OFF.
2. The power supply switch is turned on.

FOR SUPERIOR PERFORMANCE AND LASTING
DURABILITY, PLEASE DO NOT FORGET TO
CONDUCT PROPER AND REGULAR
MAINTENANCE.

2. The eliminator is cleaned with the cleaner or washed in clear water.

Please wash the dirty eliminator in lukewarm water with neutral detergent.

Please do not use a hot water of 50°C or more.

(It transforms occasionally.)

It is necessary to avoid massage washing and squeeze strongly.

It must rinse enough and the detergent must not remain.

3. When the eliminator is washed in clear water, it is often dried under the shade.

Please do not dry it to direct sunshine and a direct fire.

1. Removing the eliminator.

The eliminator is mounted in the service panel.

(in front of the heat exchanger.)

1.2 CLEANING OF PANEL.

Clean dirt of panel as follows.
Use a household neutral cleanser such as for dishes or
vegetables.
Motion a soft cloth with the cleanser, then wipe lightly.
Next, wipe three or four times with another soft cloth moisten with
water.
Finally, wipe off all the remaining cleanser with a soft cloth.
Moisten a soft cloth with the alcohol, then wipe off lightly.
Isopropyl alcohol is sold at stores as regents in small quantities.

Note:

Alcohol is highly combustible. Take extreme care

when handling. Also, do not use paint or adhesive

thinner.

1.3 CLEANING THE OUTDOOR HEAT EXCHANGER

If you use your air conditioner for prolonged periods, the outdoor heat exchanger
will become dirty, impairing its function and reducing air conditioners performance.
Consult your equipment supplier or air conditioning contractor on how to clean the
heat exchanger.

Warning

1.Do not wash the unit with water.

If washed with water, electrical shock may be caused.

2.Ahead of the maintenance.

For safety, turn the power source off before service work.

4. The eliminator is installed as before.

Fingermarks

Grease

Neutral
Cleanser

Adhesive

Paste

Isopropyl
alcohol

11. SERVICING AND MAINTENANCE

Содержание 100 A/AR






































Отзывы:

Нет отзывов