ACS Precont S, Техническое руководство, Страница: 18 / 28

Precont S
page 18 of 28
Environmental conditions
Environmental temperature: – 40°C...+85°C, limitation at Ex variants
additional limitations by material Environmental temperature range
Connection housing PBT -25...+85°C
Connection housing PP -10...+85°C
Connection cable PE -40...+70°C
Process temperatures: – 40°C...+100°C, limitation at Ex variants
Limitations by variant Process temperature range
Temperature decoupler at S10 / S40 -40...+125°C
Precont S30 -20...+150°C
Precont S70 -10...+100°C
Temperature decoupler B at S70 -10...+200°C
Temperature decoupler C at S70 -20...+275°C
Capillary tube at S70 -40...+370°C
additional limitations by material Process temperature range
Gasket FPM -25...+140°C
Gasket EPDM -40...+130°C
Gasket CR -40...+120°C
Gasket FFKM -25...+140°C
Gasket NBR -30...+110°C
Process pressure ranges: depends on variant, maximum – 1 bar ...1000 bar
Overload / burst strength: depends on measuring range, see table overload pressure / burst pressure
Vacuum strength: 0 mbar
abs
Ceramic membrane –0,1...0 bar resp. 0...0,1 bar

700mbar
abs
(at S40 process connection 8 / R

0 mbar
abs
)
Ceramic membrane –0,1...+0,1 bar resp. 0...0,2 bar

500mbar
abs
(at S40 process connection 8 / R

0mbar
abs
)
Pressure transmitting liquid: Precont S20 Synthetic oil ranges  0...25 bar
Precont S30 Synthetic oil FDA listed
Precont S70 Food oil / Silicone oil / high temperature oil
Weight: depends on variant
Torque strength:  50 Nm at process connections with screw-in thread
Protection classification: IP67 EN/IEC 60592
Climatic classification: 4K4H EN/IEC 60721-3
Vibration classification 4 g 5 - 100 Hz
EM – compatibility: emission EN/IEC 61326-1 operation device class B
immunity EN/IEC 61326-1 industrial range
Reference conditions: EN/IEC 60770-1 T = 15...35 °C, relative humidity 45...75 %,
environmental air pressure 860...1060 kPa