Configuration Settings
#
Setting
Description
0
Firmware Version
= version # of firmware
1
Serial Baud Rate
110, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600 (default), 14400, 19200, 28800,
38400, 57600, 115200
2
Serial Data Bits
7, 8 (default)
3
Serial Stop Bits
1 (default), 2
4
Serial Parity
NONE (default), EVEN, ODD
5
RS485 Mode
None (default), Primary, Secondary
6
USB Mode
SD Card (default), Serial port
7
TPad Show Up Left-X
= Touch Keypad Show upper left X coordinate (0 – 319) (default=270)
8
TPad Show Up Left-Y
= Touch Keypad Show upper left Y coordinate (0 – 239) (default=0)
9
TPad Show Lo Right-X
= Touch Keypad Show upper left x coordinate (0 – 319) (default=319)
10
TPad Show Lo Right-Y
= Touch Keypad Show upper left x coordinate (0 – 239) (default=48)
11
TPad Style
= NONE, QWERTY, NUMERIC, QWERTY TOP, NUMERIC TOP
12
TPad Scheme
= RED, GREEN, BLUE, GRAY 25%, GRAY 50%
13
MAC Address
= 02:01:23:45:67:89 (default)
14
Use Static IP
= 0-DHCP client, 1-static IP (default)
15
IP Address
= 192.168.1.200 (default)
16
IP Mask
= 255.255.255.0 (default)
17
Router IP Address
= 192.168.1.1 (default)
18
FTP Server Port
= 21 (default)
19
VNC Server Port
= 5900 (default)
20
HTTP Server Port
= 80 (default)
21
TCP/IP Raw Port
= 23 (default)
22
NTP Server
= 192.168.1.1 (default)
23
NTP Client Port
= 123 (default)
24
Local Time Zone
= -5 hours from UTC (default)
25
Daylight Savings
0 = no (default) adds one hour to received NTP time
26
Serial Number
00000000 (default)
27
Volume
Last volume setting
28
Art-Net IP Port
6454
29
Art-Net Net
0 (default) – 127
30
Art-Net Sub-Net
0 (default) – 15
31
Art-Net Universe
0 (default) – 15
32
Art-Net Target IP
255.255.255.255 (default)
33
End of Config
= end of configuration items placeholder
34
NV Status Byte
= NV status byte (default = 227)
The configuration settings may be changed in two ways; a VNC connection to the CFSound-IV’s IP address
with the DEFAULT jumper installed or via an ACS Basic program.
