BioSIMKey - ADT60 Reference Manual
rev 1.0, April, 2002
Advanced Card Systems Ltd.
Page 18 of 26
BAUD RATE
Selects the baud rate (bps) of the serial interface between reader and host
system. The default hardware baud rate is 9600 bps. (baud rate changes
only valid on RS232 reader).
BAUD RATE
Serial baud rate (bps)
12
H
9600
11
H
19200
10
H
38400
03
H
14400
02
H
28800
01
H
57600
00
H
115200
Response data format
No response data
The new protocol becomes effective by the completion of the
SET_PROTOCOL
command,
immediately
after the BioSIMKey has sent out the response string to the
SET_PROTOCOL
command
.
8.1.3 SELECT_CARD_TYPE
This command sets the required card type. The firmware in the BioSIMKey adjusts the
communication protocol between reader and the inserted card according to the selected card
type.
Command format
Instruction Code
Data length
Data
TYPE
02
H
01
H
TYPE
See Appendix A for the value to be specified in this command for a particular
card to be used.
Response data format
No response data
