ACS ACR38 Smart страница 38 Скачать руководство пользователя

Страница: 38 / 43

ACR38 Reference Manual

version 1.9 February 2006

Response data format

Header

Status

Data length

BYTE 1

…

BYTE N

SW1

SW2

LEN

BYTE x

Data read from memory card

SW1, SW2

= 90

if no error

8.2.8.3 WRITE_ONE_BYTE_MEMORY_CARD

To write one byte to the specified address of the inserted card. The byte is written to the card with LSB first,

i.e., the bit at card address 0 is regarded as the LSB of byte 0.

Four different WRITE modes are available for this card type, which are distinguished by a flag in the

command data field:

a) Write

The byte value specified in the command is written to the specified address. This command can be

used for writing personalization data and counter values to the card.

b) Write with carry

The byte value specified in the command is written to the specified address and the command is

sent to the card to erase the next lower counter stage. This write mode can therefore only be used

for updating the counter value in the card.

c) Write with backup enabled (SLE4436 and SLE5536 only)

The byte value specified in the command is written to the specified address. This command can be

used for writing personalization data and counter values to the card. Backup bit is enabled to

prevent data loss when card tearing occurs.

d) Write with carry and backup enabled (SLE4436 and SLE5536 only)

The byte value specified in the command is written to the specified address and the command is

sent to the card to erase the next lower counter stage. This write mode can therefore only be used

for updating the counter value in the card. Backup bit is enabled to prevent data loss when card

tearing occurs.

With all write modes, the byte at the specified card address is not erased prior to the write operation and,

hence, memory bits can only be programmed from '1' to '0'.

The backup mode available in the SLE4436 and SLE5536 card can be enabled or disabled in the write

operation.



Advanced Card Systems Ltd.

Page 38 of 43

Содержание ACR38 Smart












































Результаты поиска

Содержание ACR38 Smart

Отзывы:

Похожие инструкции для ACR38 Smart

Бренды по названию

Популярные бренды

ACS ACR38 Smart, Справочное руководство

Результаты поиска

Содержание ACR38 Smart

Отзывы:

Похожие инструкции для ACR38 Smart

Бренды по названию

Популярные бренды