ACS A1410 PULSAR, Руководство по эксплуатации

Страница: 15 / 40

Ultrasonic velocity tester A1410 Pulsar
Operation Manual
15
ACOUSTIC
CONTROL
SYSTEMS
2.3 INTENDED USE OF THE ULTRASONIC PULSE VELOCITY TESTER
2.3.1 SETUP mode
In the SETUP mode there is a list of parameters accessible for editing and calibration.
In the SETUP mode in the bottom line the set date and time are indicated on the screen.
All instrument settings are saved when the instrument is switched off, if the instrument battery is
charged.
The SETUP mode of the DIGITAL mode is shown in Figure 10 on the screen.
Keys
/ :
- Moving up and down the menu items, you can move in both directions cyclically. As soon as the active
line highlights a parameter, it becomes accessible and can be selected and edited.
- Confirm entering the editing mode of the selected parameter;
- Change the value of the selected parameter.
ENTER button:
- Selecting parameter for editing;
- Saving new parameter value.
Menu items in the SETUP mode, the appropriate parameters (in the metric measurement system) and
functions are given in the Table 4.
2
Figure 10
Menu item
(parameter)
Parameter value Description
Mode Digital / Waveform Select the measurement mode
Result type Velocity / Time Selecting the type if the indicated result
Averaging, qty 1 / 2 / 4 / 8 / 16 / 32 / 64 Setting the averaging factor
Table 4
▼