ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
29
6. Reset to factory settings
27
Menu group level
Programming interlock,
run
:
Description see page 9, menu level
run
6. Reset to factory settings
To return the unit to a
defined basic state
, a reset can be carried out to the default values.
The following procedure should be used:
• Switch off the power supply
• Press button
[P]
• Switch on voltage supply and press
[P]-
button until
„- - - - -“
is shown in the display.
With reset, the default values of the program table are loaded and used for subsequent operation. This puts
the unit back to the state in which it was supplied.
Caution! All application-related data are lost.
