background image

AR-B9673 User’s Guide

 

 

1. INTRODUCTION 

Welcome to the AR-B9673 ISA Single Board Computer. The AR-B9673 board is PIC form factor board, which 
comes equipped with high performance VIA ® Eden or C3 Processor with the VIA ® advanced chipset Apollo 
PLE133T (VT8601T and VT82C686B). This product is designed for the system manufacturers, integrators, or VARs 
that want to provide all the performance, reliability, and quality at a reasonable price. 

 

In addition, the AR-B9673 provides on chip VGA. The VGA, which provides up to True Color (32 bit) 1024x768, or 
High Color (16 bit) 1280x1024 resolution. The VGA memory shared with main memory. 

 

AR-B9673 have one network controller on board, uses Realtek RTL8100B LAN controller, a fully integrated 
10/100BASE-TX solution with high performance networking functions and Alert-on-LAN features. 

 

1.1 SPECIFICATIONS 

 

CPU: 

VIA ® Eden 600MHz EBGA. 

 

DMA channels:

    7. 

 

Interrupt levels:

 15. 

 

Chipset:

 VIA ® Apollo PLE133T (VT8601T Integrated 2D / 3D graphics accelerator and VT82C686B). 

 

Memory:

 SDRAM 128M on-board. 

 

VGA Controller:

 Embedded VGA controller, Screen Resolution: up to True Color (32 bit) 1024x768, or High 

Color (16 bit) 1280x1024. 

 

Display Interface:

    CRT – D-SUB 15-pin female connector.

 

 

Ultra ATA/33/66/100

 

IDE Interface:

 Two PCI Enhance IDE channel. The south bridge VT82C686B supports 

Ultra ATA/33/66/100 IDE interface. To support Ultra ATA66/100 Hard disk, a specified cable must be 
available. 

 

Compact Flash Interface: 

Supports Compact Flash Type II B Interface. 

 

Floppy disk drive interface:

 2.88 MB, 1.44MB, 1.2MB, 720KB, or 360KB floppy disk drive. 

 

Series ports: 

Two high-speed 16550 compatible UARTs ports. 

                                    COM1: On-board D-SUB 9-pin male external port. Only RS-232C. 
 

 

 

    COM2: On-board D-SUB 9-pin male external port. Shared with RS-485. 

 

Parallel Port

: one IEEE1284 compatible Bi-directional ports. 

 

IrDA port:

 Supports IrDA (HPSIR) and ASK (Amplitude Shift Keyed) IR port multiplexed on COM2.

 

 

USB port: 

Support two USB 1.1

 

compatible ports.

 

 

Watchdog timer: 

Software programmable 1~63sec. 

 

Keyboard Connector & PS/2 Mouse:

 Port on-board. 

 

Power Consumption: 

+5V@4A (Typical), +12V@1A(Typical). 

 

Operating Temperature:

 0

°

 ~ 60

 

 

1.2 PACKING LIST 

In addition to this 

User's Manual

, the AR-B9673 package includes the following items: 

 

1 AR-B9673 CPU board 

 

1 Floppy disk drive adapter cable 

 

1 Parallel port and serial port adapter cable mounted on one bracket 

 

2 USB ports cable 

 
 
 

 

 
 
 
 
 
 
 
 

Содержание AR-B1673
























Отзывы: