Acrosser Technology AND-APL1E Series, Руководство пользователя

Страница: 28 / 42

AND-APL1Ex
28 Acrosser Technology Co., Ltd.
• Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning).
The standard setting is 1 stop bit. Communication with slow devices may require
more than 1 stop bit.
• Flow control
Flow control can prevent data loss from buffer overflow. When sending data, if the
receiving buffers are full, a ‘stop’ signal can be sent to stop the data flow. Once the
buffers are empty, a ‘start’ signal can be sent to re-start the flow. Hardware flow
control uses two wires to send start/stop signals.
• VT-UTF8 Combo Key Support
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
• Recorder Mode
With this mode enabled only text will be sent. This is to capture Terminal data.
• Resolution 100x31
Enables or disables extended terminal resolution.
• Legacy OS Redirection Resolution
On Legacy OS, the Number of Rows and Columns supported redirection.
• Putty KeyPad
Select FunctionKey and KeyPad on Putty.
• Redirection After BIOS POST
The Setting Specify if BootLoader is selected than Legacy console redirection is
disabled before booting to Legacy OS. Default value is Always Enable which means
Legacy console Redirection is enabled for Legacy OS.