Acrosser Technology AND-APL1E Series, Руководство пользователя

Страница: 18 / 42

AND-APL1Ex
18 Acrosser Technology Co., Ltd.
3. AMI BIOS Setup
3.1. System Test and Initialization
The system uses certain routines to perform testing and initialization. If an error,
fatal or non-fatal, is encountered, a few short beeps or an error message will be
outputted. The board can usually continue the boot up sequence with non-fatal
errors.
The system configuration verification routines check the current system configuration
against the values stored in the CMOS memory. If they do not match, an error
message will be outputted, in which case you will need to run the BIOS setup
program to set the configuration information in memory.
There are three situations in which you will need to change the CMOS settings:
•
You are starting your system for the first time
• You have changed your system’s hardware
•
The CMOS memory has lost power and the configuration information is erased
The system’s CMOS memory uses a backup battery for data retention, which is to
be replaced once emptied.
3.2. AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify
basic system configurations, which is stored in the battery-backed CMOS RAM and
BIOS NVRAM so that the information is retained when the power is turned off.
To enter BIOS Setup, press <Del> or <F2> immediately while your computer is
powering up.
The function for each interface can be found below.
Main – Date and time can be set here. Press <Tab> to switch between date
elements
Advanced – Enable/ Disable boot option for legacy network devices
Chipset – For hosting bridge parameters
Boot
– Enable/ Disable quiet Boot Option
Security – The setup administrator password can be set here
Save & Exit – Save your changes and exit the program