Acronova Technology NB12 Series, Руководство по эксплуатации

Страница: 20 / 28

Operation Manual, Nimbie NB12 Version 1.3
20 © 2011, Acronova Technology, Inc.
Important:
The Nimbie will save the latest master disc image, for future
duplication, on the hard disk until a new master disc has been
read. This is the case even if the Nimbie has been turned off or
restarted after a previous session has completed.
If using multiple master discs to produce different quantities of
duplicate discs, repeat steps 1 and 2 to load additional sets of masters
and blank discs. Then, press the High or Norm-Speed Duplication
button to start duplicating discs. The illustration below shows an
example of three disc sets, stacked in interleave mode with one on top
of another, for multiple-to-multiple duplication,
Duplication Simulation
This mode is used to test discs for writing by emulating a
duplication session and will not actually write to the discs.
Follow the steps below to start a duplication simulation
session:
1) Load the master disc into the disc loader.
2) Load the desired quantity of blank discs on top of the master disc.
3) Press the Test/Abort button to start. Nimbie will run the operation
until the disc loader is empty.
Important:
Duplication simulation will not work with DVD+R, DVD+RW and
DVD+R DL discs. When a DVD+ disc is detected it will be
rejected.