Acronova Technology NB12 Series, Руководство по эксплуатации

Страница: 15 / 28

Version 1.3 Operation Manual, Nimbie NB12
© 2011, Acronova Technology, Inc. 15
B
EFORE
G
ETTING
S
TARTED
Tips for Handling Optical Discs
Never touch the printable or data surface of the disc,
as it may decrease quality and disc lifespan. Refer
to the arrows on the illustration to the right, Always
handle discs from the outer edge or the center hole.
What You Need to Start a Disc Duplication Session
The Nimbie NB12 is a standalone duplicator, which does not require a
computer connection. You will need the following to start a
duplication session:
ƒ
Master Discs
The original disc providing the source of data for a duplication
session.
ƒ
Blank Discs
The disc that Nimbie will write the source data to during a
duplication session.
Important Tips for Loading Discs to Nimbie
When the disc loader is empty, do not attempt to
load many discs at once.
First, carefully load only one disc into the disc
loader and assure it is firmly resting on the three
wheels seen in the illustration to the right. You
may then gradually load additional discs on top of
the first disc, until the loader is full.
Nimbie processes discs in a First In, First Out (FIFO)
sequence. During a duplication session, if a disc
refill is required, before the loader becomes empty,
gently load additional discs.
Rejected Discs
Nimbie is designed to have Rejected Discs
come out underneath the unit. Do not
block the Reject Disc Slot.
Periodically remove rejected discs so that
there is room to accommodate more discs