Files
(p. 88)
You may have to specify credentials for the destination. Skip this step when operating on a
machine booted with bootable media.
Access credentials
(p. 89)
[Optional] Provide credentials for the destination if the task credentials do not enable
recovery of the selected data. To access this option, select the
Advanced view
check box.
When to recover
Recover
(p. 89)
Select when to start recovery. The task can start immediately after its creation, be scheduled
for a specified date and time in the future or simply saved for manual execution.
[Optional] Acronis Universal Restore
Applies to: Windows OS and system volume recovery
Universal Restore
Use the Acronis Universal Restore when you need to recover and boot up Windows on
dissimilar hardware.
Automatic drivers search
Specify where the program should search for HAL, mass storage and network adapter
drivers. Acronis Universal Restore will install drivers that better fit the target hardware.
Mass storage drivers to install anyway
[Optional] Specify the mass storage drivers manually if the automatic drivers search has not
found the appropriate drivers. To access this option, select the
Advanced view
check box.
Recovery options
Settings
[Optional] Customize the recovery operation by configuring the recovery options, such as
pre/post recovery commands, recovery priority, error handling or notification options. If you
do nothing in this section, the default values will be used.
After any of the settings is changed against the default value, a new line that displays the
newly set value appears. The setting status changes from
Default
to
Custom
. Should you
modify the setting again, the line will display the new value unless the new value is the
default one. When the default value is set, the line disappears and so you always see only the
settings that differ from the default values in the
Settings
section.
Clicking
Reset to default
resets all the settings to default values.
After you complete all the required steps, click
OK
to create the commit creating of the recovery
task.
5.3.1
Task credentials
Provide credentials for the account under which the task will run.
To specify credentials
1.
Select one of the following:
Run under the current user
The task will run under the credentials with which the user who starts the tasks is logged on.
If the task has to run on schedule, you will be asked for the current user's password on
completing the task creation.
