To protect the archive from unauthorized access
1.
Select the
Set password for the archive
check box.
2.
In the
Enter the password
field, type a password.
3.
In the
Confirm the password
field, re-type the password.
4.
Click
OK
.
3.3.1.2
Pre/Post commands
This option is effective for Windows operating systems and PE-based bootable media.
The option enables you to define the commands to be automatically executed before and after the
backup procedure.
The following scheme illustrates when pre/post commands are executed.
Pre-backup
command
Backup
Post-backup
command
Examples of how you can use the pre/post commands:
delete some temporary files from the disk before starting backup
configure a third-party antivirus product to be started each time before the backup starts
copy an archive to another location after the backup ends.
The program does not support interactive commands, i.e. commands that require user input (for
example, "pause").
To specify pre/post commands
1.
Enable pre/post commands execution by checking the following options:
Execute before the backup
Execute after the backup
2.
Do any of the following:
Click
Edit
to specify a new command or a batch file
Select the existing command or the batch file from the drop-down list
3.
Click
OK
.
Pre-backup command
To specify a command/batch file to be executed before the backup process starts
1.
In the
Command
field, type a command or browse to a batch file. The program does not support
interactive commands, i.e. commands that require user input (for example, "pause".)
2.
In the
Working directory
field, specify a path to a directory where the command/batch file will
be executed.
3.
In the
Arguments
field specify the command’s execution arguments, if required.
4.
Depending on the result you want to obtain, select the appropriate options as described in the
table below.
5.
Click
Test command
to check if the command is correct.
Check box
Selection
