XVME-6300
6U VME Intel i7 Core Processor Board
Acromag, Inc. Tel: 248-295-0310
- 1 -
www.acromag.com
Introduction
Module Features
The XVME-6300 offers the following features:
Intel® Core™ i7 Processor. Available models are all dual-core: i7-610E at 2.53GHz, i7-620LE at 2GHz and i7-
620UE at 1.06GHz.
4GB or 8GB of DDR3 SDRAM running at 1033MHz (610E, 620LE) or 800MHz (620UE).
Two channels of SATA-300 out the P2. Use the XVME-9630 to provide the connectors needed to connect
external SATA drives.
Quad 10/100/1000 Base T Ethernet controllers with
o
One port out the front panel RJ-45 connector
o
Two ports out the P0 to support rear Ethernet (supports Vita 31.1)
o
One port available on the optional XBRD-9050 module
On-Board 1.8” Hard Drive using our XBRD-9050 module. This mounts in the PMC 2 site and does not allow for a
PMC module to be used.
VME64X VMEbus interface with programmable hardware byte swapping.
Support for Vita 31.1 Switch Fabric in compliant back planes.
Four serial ports:
o
Two switchable RS-232/RS-422/RS-485 serial ports (Com 1 & 2) on P2
o
One RS-232 serial port (Com3) on optional XBRD-9050 module
o
One RS-232 serial port on front panel (Com 4)
Six Universal Serial Bus (USB 2.0) ports:
o
Two on front panel connector
o
Two out P2
o
Two on optional XBRD-9050 module
PMC (PCI Mezzanine Card) sites with front panel I/O 32/64-bit 33/66/133MHZ PCI-X with full rear I/O using
optional P0 connector (PMC 1) and partial I/O using P2 connector (PMC 2).
Front panel ABORT/RESET switch with indicating lights. Red for “fail” and green for “pass”.
Ejector type handles in IEEE 1101.10 (CompactPCI type) or IEEE 1101.1 (legacy VME type).
Conduction cooled models available supporting -40C to 85C operational temperature range.
